AeroTech Interlock Controller

 GROUND SUPPORT
 Launch Pads
 Firing Consoles
 Clip Whips
 Build a Launcher
 Build a Launch Pad
 Multi-Pad Launcher
 Solderless Igniters
 Copperheads
 Cluster Wires


Search the site!
The AeroTech Interlock™ is the launch controller offered by AeroTech. This is a reasonable piece of equipment although not much better than the Estes Electron Beam® controller. It's main advantage is that it can fire AeroTech Copperhead™ igniters (which requires 12v and luck).

Although not an impressive launch controller, it is nicely made and is capable of handling 12v, but doesn't offer much beyond those basics. However, it can fire Copperhead ignitors, which penlight battery controllers can't.

Even if you don't use their controller, you pretty much need to use one of their clips for Copperhead ignitors because of the design. The Copperheads are flat and you apply the current to both sides of the strips which makes aligator clips problematic. The ignitor clip (one) is designed so it can only apply current to both sides of the strip, making this automatic (assuming you can feed the ignitor into the jaws.

The safety key has to be held in with one hand while you press the launch button with the other (unless you have large and flexible hands. So it would be hard to have an accidental launch.

AEROTECH INTERLOCK™ CONTROLLER
  • Can be used with all model rockets
  • Audible arming signal
  • KEY-EJECT™ safey key ejection system
  • 40 feet of power cord
  • Arming status display
  • Flip-up cover with launch checklist

AeroTech has a web site. You can find out more about this controller there as well.

Submitted by John Coker


Sixteen feet of endorphins!
Check out our advertiser: Sixteen feet of endorphins!

Copyright © 1996-2000, Rocketry Online, all rights reserved.